Annotation of imach/latex/Doxyfile.in.sav, revision 1.1
1.1 ! brouard 1: # Doxyfile 1.4.7
! 2:
! 3: # Copyright (C) 1997-2007 by Dimitri van Heesch
! 4: # License: GNU GPLv2+
! 5:
! 6: # This file describes the settings to be used by the documentation system
! 7: # doxygen (www.doxygen.org) for a project
! 8: #
! 9: # All text after a hash (#) is considered a comment and will be ignored
! 10: # The format is:
! 11: # TAG = value [value, ...]
! 12: # For lists items can also be appended using:
! 13: # TAG += value [value, ...]
! 14: # Values that contain spaces should be placed between quotes (" ")
! 15:
! 16: #---------------------------------------------------------------------------
! 17: # Project related configuration options
! 18: #---------------------------------------------------------------------------
! 19:
! 20: # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
! 21: # by quotes) that should identify the project.
! 22:
! 23: PROJECT_NAME = "@PACKAGE_NAME@"
! 24:
! 25: # The PROJECT_NUMBER tag can be used to enter a project or revision number.
! 26: # This could be handy for archiving the generated documentation or
! 27: # if some version control system is used.
! 28:
! 29: PROJECT_NUMBER = "@PACKAGE_VERSION@"
! 30:
! 31: # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
! 32: # base path where the generated documentation will be put.
! 33: # If a relative path is entered, it will be relative to the location
! 34: # where doxygen was started. If left blank the current directory will be used.
! 35:
! 36: OUTPUT_DIRECTORY = docygen
! 37:
! 38: # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
! 39: # 4096 sub-directories (in 2 levels) under the output directory of each output
! 40: # format and will distribute the generated files over these directories.
! 41: # Enabling this option can be useful when feeding doxygen a huge amount of
! 42: # source files, where putting all generated files in the same directory would
! 43: # otherwise cause performance problems for the file system.
! 44:
! 45: CREATE_SUBDIRS = NO
! 46:
! 47: # The OUTPUT_LANGUAGE tag is used to specify the language in which all
! 48: # documentation generated by doxygen is written. Doxygen will use this
! 49: # information to generate all constant output in the proper language.
! 50: # The default language is English, other supported languages are:
! 51: # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
! 52: # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
! 53: # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
! 54: # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
! 55: # Swedish, and Ukrainian.
! 56:
! 57: OUTPUT_LANGUAGE = English
! 58:
! 59: # This tag can be used to specify the encoding used in the generated output.
! 60: # The encoding is not always determined by the language that is chosen,
! 61: # but also whether or not the output is meant for Windows or non-Windows users.
! 62: # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
! 63: # forces the Windows encoding (this is the default for the Windows binary),
! 64: # whereas setting the tag to NO uses a Unix-style encoding (the default for
! 65: # all platforms other than Windows).
! 66:
! 67: USE_WINDOWS_ENCODING = NO
! 68:
! 69: # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
! 70: # include brief member descriptions after the members that are listed in
! 71: # the file and class documentation (similar to JavaDoc).
! 72: # Set to NO to disable this.
! 73:
! 74: BRIEF_MEMBER_DESC = YES
! 75:
! 76: # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
! 77: # the brief description of a member or function before the detailed description.
! 78: # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
! 79: # brief descriptions will be completely suppressed.
! 80:
! 81: REPEAT_BRIEF = YES
! 82:
! 83: # This tag implements a quasi-intelligent brief description abbreviator
! 84: # that is used to form the text in various listings. Each string
! 85: # in this list, if found as the leading text of the brief description, will be
! 86: # stripped from the text and the result after processing the whole list, is
! 87: # used as the annotated text. Otherwise, the brief description is used as-is.
! 88: # If left blank, the following values are used ("$name" is automatically
! 89: # replaced with the name of the entity): "The $name class" "The $name widget"
! 90: # "The $name file" "is" "provides" "specifies" "contains"
! 91: # "represents" "a" "an" "the"
! 92:
! 93: ABBREVIATE_BRIEF =
! 94:
! 95: # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
! 96: # Doxygen will generate a detailed section even if there is only a brief
! 97: # description.
! 98:
! 99: ALWAYS_DETAILED_SEC = YES
! 100:
! 101: # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
! 102: # inherited members of a class in the documentation of that class as if those
! 103: # members were ordinary class members. Constructors, destructors and assignment
! 104: # operators of the base classes will not be shown.
! 105:
! 106: INLINE_INHERITED_MEMB = NO
! 107:
! 108: # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
! 109: # path before files name in the file list and in the header files. If set
! 110: # to NO the shortest path that makes the file name unique will be used.
! 111:
! 112: FULL_PATH_NAMES = YES
! 113:
! 114: # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
! 115: # can be used to strip a user-defined part of the path. Stripping is
! 116: # only done if one of the specified strings matches the left-hand part of
! 117: # the path. The tag can be used to show relative paths in the file list.
! 118: # If left blank the directory from which doxygen is run is used as the
! 119: # path to strip.
! 120:
! 121: #STRIP_FROM_PATH = @top_srcdir@/src
! 122: STRIP_FROM_PATH = @CMAKE_CURRENT_SOURCE_DIR@
! 123:
! 124: # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
! 125: # the path mentioned in the documentation of a class, which tells
! 126: # the reader which header file to include in order to use a class.
! 127: # If left blank only the name of the header file containing the class
! 128: # definition is used. Otherwise one should specify the include paths that
! 129: # are normally passed to the compiler using the -I flag.
! 130:
! 131: #STRIP_FROM_INC_PATH =
! 132: STRIP_FROM_INC_PATH = @CMAKE_CURRENT_SOURCE_DIR@/
! 133:
! 134: # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
! 135: # (but less readable) file names. This can be useful is your file systems
! 136: # doesn't support long names like on DOS, Mac, or CD-ROM.
! 137:
! 138: SHORT_NAMES = NO
! 139:
! 140: # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
! 141: # will interpret the first line (until the first dot) of a JavaDoc-style
! 142: # comment as the brief description. If set to NO, the JavaDoc
! 143: # comments will behave just like the Qt-style comments (thus requiring an
! 144: # explicit @brief command for a brief description.
! 145:
! 146: JAVADOC_AUTOBRIEF = NO
! 147:
! 148: # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
! 149: # treat a multi-line C++ special comment block (i.e. a block of //! or ///
! 150: # comments) as a brief description. This used to be the default behaviour.
! 151: # The new default is to treat a multi-line C++ comment block as a detailed
! 152: # description. Set this tag to YES if you prefer the old behaviour instead.
! 153:
! 154: MULTILINE_CPP_IS_BRIEF = NO
! 155:
! 156: # If the DETAILS_AT_TOP tag is set to YES then Doxygen
! 157: # will output the detailed description near the top, like JavaDoc.
! 158: # If set to NO, the detailed description appears after the member
! 159: # documentation.
! 160:
! 161: DETAILS_AT_TOP = NO
! 162:
! 163: # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
! 164: # member inherits the documentation from any documented member that it
! 165: # re-implements.
! 166:
! 167: INHERIT_DOCS = YES
! 168:
! 169: # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
! 170: # a new page for each member. If set to NO, the documentation of a member will
! 171: # be part of the file/class/namespace that contains it.
! 172:
! 173: SEPARATE_MEMBER_PAGES = NO
! 174:
! 175: # The TAB_SIZE tag can be used to set the number of spaces in a tab.
! 176: # Doxygen uses this value to replace tabs by spaces in code fragments.
! 177:
! 178: TAB_SIZE = 2
! 179:
! 180: # This tag can be used to specify a number of aliases that acts
! 181: # as commands in the documentation. An alias has the form "name=value".
! 182: # For example adding "sideeffect=\par Side Effects:\n" will allow you to
! 183: # put the command \sideeffect (or @sideeffect) in the documentation, which
! 184: # will result in a user-defined paragraph with heading "Side Effects:".
! 185: # You can put \n's in the value part of an alias to insert newlines.
! 186:
! 187: ALIASES =
! 188:
! 189: # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
! 190: # sources only. Doxygen will then generate output that is more tailored for C.
! 191: # For instance, some of the names that are used will be different. The list
! 192: # of all members will be omitted, etc.
! 193:
! 194: OPTIMIZE_OUTPUT_FOR_C = YES
! 195:
! 196: # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
! 197: # tag is set to YES, then doxygen will reuse the documentation of the first
! 198: # member in the group (if any) for the other members of the group. By default
! 199: # all members of a group must be documented explicitly.
! 200:
! 201: DISTRIBUTE_GROUP_DOC = NO
! 202:
! 203: # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
! 204: # the same type (for instance a group of public functions) to be put as a
! 205: # subgroup of that type (e.g. under the Public Functions section). Set it to
! 206: # NO to prevent subgrouping. Alternatively, this can be done per class using
! 207: # the \nosubgrouping command.
! 208:
! 209: SUBGROUPING = YES
! 210:
! 211: #---------------------------------------------------------------------------
! 212: # Build related configuration options
! 213: #---------------------------------------------------------------------------
! 214:
! 215: # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
! 216: # documentation are documented, even if no documentation was available.
! 217: # Private class members and static file members will be hidden unless
! 218: # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
! 219:
! 220: EXTRACT_ALL = NO
! 221:
! 222: # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
! 223: # will be included in the documentation.
! 224:
! 225: EXTRACT_PRIVATE = YES
! 226:
! 227: # If the EXTRACT_STATIC tag is set to YES all static members of a file
! 228: # will be included in the documentation.
! 229:
! 230: EXTRACT_STATIC = YES
! 231:
! 232: # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
! 233: # defined locally in source files will be included in the documentation.
! 234: # If set to NO only classes defined in header files are included.
! 235:
! 236: EXTRACT_LOCAL_CLASSES = YES
! 237:
! 238: # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
! 239: # undocumented members of documented classes, files or namespaces.
! 240: # If set to NO (the default) these members will be included in the
! 241: # various overviews, but no documentation section is generated.
! 242: # This option has no effect if EXTRACT_ALL is enabled.
! 243:
! 244: HIDE_UNDOC_MEMBERS = NO
! 245:
! 246: # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
! 247: # undocumented classes that are normally visible in the class hierarchy.
! 248: # If set to NO (the default) these classes will be included in the various
! 249: # overviews. This option has no effect if EXTRACT_ALL is enabled.
! 250:
! 251: HIDE_UNDOC_CLASSES = NO
! 252:
! 253: # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
! 254: # friend (class|struct|union) declarations.
! 255: # If set to NO (the default) these declarations will be included in the
! 256: # documentation.
! 257:
! 258: HIDE_FRIEND_COMPOUNDS = NO
! 259:
! 260: # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
! 261: # documentation blocks found inside the body of a function.
! 262: # If set to NO (the default) these blocks will be appended to the
! 263: # function's detailed documentation block.
! 264:
! 265: HIDE_IN_BODY_DOCS = NO
! 266:
! 267: # The INTERNAL_DOCS tag determines if documentation
! 268: # that is typed after a \internal command is included. If the tag is set
! 269: # to NO (the default) then the documentation will be excluded.
! 270: # Set it to YES to include the internal documentation.
! 271:
! 272: INTERNAL_DOCS = NO
! 273:
! 274: # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
! 275: # file names in lower-case letters. If set to YES upper-case letters are also
! 276: # allowed. This is useful if you have classes or files whose names only differ
! 277: # in case and if your file system supports case sensitive file names. Windows
! 278: # and Mac users are advised to set this option to NO.
! 279:
! 280: CASE_SENSE_NAMES = YES
! 281:
! 282: # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
! 283: # will show members with their full class and namespace scopes in the
! 284: # documentation. If set to YES the scope will be hidden.
! 285:
! 286: HIDE_SCOPE_NAMES = NO
! 287:
! 288: # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
! 289: # will put a list of the files that are included by a file in the documentation
! 290: # of that file.
! 291:
! 292: SHOW_INCLUDE_FILES = YES
! 293:
! 294: # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
! 295: # is inserted in the documentation for inline members.
! 296:
! 297: INLINE_INFO = YES
! 298:
! 299: # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
! 300: # will sort the (detailed) documentation of file and class members
! 301: # alphabetically by member name. If set to NO the members will appear in
! 302: # declaration order.
! 303:
! 304: SORT_MEMBER_DOCS = NO
! 305:
! 306: # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
! 307: # brief documentation of file, namespace and class members alphabetically
! 308: # by member name. If set to NO (the default) the members will appear in
! 309: # declaration order.
! 310:
! 311: SORT_BRIEF_DOCS = NO
! 312:
! 313: # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
! 314: # sorted by fully-qualified names, including namespaces. If set to
! 315: # NO (the default), the class list will be sorted only by class name,
! 316: # not including the namespace part.
! 317: # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
! 318: # Note: This option applies only to the class list, not to the
! 319: # alphabetical list.
! 320:
! 321: SORT_BY_SCOPE_NAME = NO
! 322:
! 323: # The GENERATE_TODOLIST tag can be used to enable (YES) or
! 324: # disable (NO) the todo list. This list is created by putting \todo
! 325: # commands in the documentation.
! 326:
! 327: GENERATE_TODOLIST = YES
! 328:
! 329: # The GENERATE_TESTLIST tag can be used to enable (YES) or
! 330: # disable (NO) the test list. This list is created by putting \test
! 331: # commands in the documentation.
! 332:
! 333: GENERATE_TESTLIST = YES
! 334:
! 335: # The GENERATE_BUGLIST tag can be used to enable (YES) or
! 336: # disable (NO) the bug list. This list is created by putting \bug
! 337: # commands in the documentation.
! 338:
! 339: GENERATE_BUGLIST = YES
! 340:
! 341: # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
! 342: # disable (NO) the deprecated list. This list is created by putting
! 343: # \deprecated commands in the documentation.
! 344:
! 345: GENERATE_DEPRECATEDLIST= YES
! 346:
! 347: # The ENABLED_SECTIONS tag can be used to enable conditional
! 348: # documentation sections, marked by \if sectionname ... \endif.
! 349:
! 350: ENABLED_SECTIONS =
! 351:
! 352: # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
! 353: # the initial value of a variable or define consists of for it to appear in
! 354: # the documentation. If the initializer consists of more lines than specified
! 355: # here it will be hidden. Use a value of 0 to hide initializers completely.
! 356: # The appearance of the initializer of individual variables and defines in the
! 357: # documentation can be controlled using \showinitializer or \hideinitializer
! 358: # command in the documentation regardless of this setting.
! 359:
! 360: MAX_INITIALIZER_LINES = 30
! 361:
! 362: # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
! 363: # at the bottom of the documentation of classes and structs. If set to YES the
! 364: # list will mention the files that were used to generate the documentation.
! 365:
! 366: SHOW_USED_FILES = YES
! 367:
! 368: # If the sources in your project are distributed over multiple directories
! 369: # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
! 370: # in the documentation. The default is NO.
! 371:
! 372: SHOW_DIRECTORIES = NO
! 373:
! 374: # The FILE_VERSION_FILTER tag can be used to specify a program or script that
! 375: # doxygen should invoke to get the current version for each file (typically from the
! 376: # version control system). Doxygen will invoke the program by executing (via
! 377: # popen()) the command <command> <input-file>, where <command> is the value of
! 378: # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
! 379: # provided by doxygen. Whatever the program writes to standard output
! 380: # is used as the file version. See the manual for examples.
! 381:
! 382: FILE_VERSION_FILTER =
! 383:
! 384: #---------------------------------------------------------------------------
! 385: # configuration options related to warning and progress messages
! 386: #---------------------------------------------------------------------------
! 387:
! 388: # The QUIET tag can be used to turn on/off the messages that are generated
! 389: # by doxygen. Possible values are YES and NO. If left blank NO is used.
! 390:
! 391: QUIET = NO
! 392:
! 393: # The WARNINGS tag can be used to turn on/off the warning messages that are
! 394: # generated by doxygen. Possible values are YES and NO. If left blank
! 395: # NO is used.
! 396:
! 397: WARNINGS = YES
! 398:
! 399: # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
! 400: # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
! 401: # automatically be disabled.
! 402:
! 403: WARN_IF_UNDOCUMENTED = YES
! 404:
! 405: # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
! 406: # potential errors in the documentation, such as not documenting some
! 407: # parameters in a documented function, or documenting parameters that
! 408: # don't exist or using markup commands wrongly.
! 409:
! 410: WARN_IF_DOC_ERROR = YES
! 411:
! 412: # This WARN_NO_PARAMDOC option can be abled to get warnings for
! 413: # functions that are documented, but have no documentation for their parameters
! 414: # or return value. If set to NO (the default) doxygen will only warn about
! 415: # wrong or incomplete parameter documentation, but not about the absence of
! 416: # documentation.
! 417:
! 418: WARN_NO_PARAMDOC = NO
! 419:
! 420: # The WARN_FORMAT tag determines the format of the warning messages that
! 421: # doxygen can produce. The string should contain the $file, $line, and $text
! 422: # tags, which will be replaced by the file and line number from which the
! 423: # warning originated and the warning text. Optionally the format may contain
! 424: # $version, which will be replaced by the version of the file (if it could
! 425: # be obtained via FILE_VERSION_FILTER)
! 426:
! 427: WARN_FORMAT = "$file:$line: $text"
! 428:
! 429: # The WARN_LOGFILE tag can be used to specify a file to which warning
! 430: # and error messages should be written. If left blank the output is written
! 431: # to stderr.
! 432:
! 433: #WARN_LOGFILE =
! 434: WARN_LOGFILE = Docygen/doxy.log
! 435:
! 436: #---------------------------------------------------------------------------
! 437: # configuration options related to the input files
! 438: #---------------------------------------------------------------------------
! 439:
! 440: # The INPUT tag can be used to specify the files and/or directories that contain
! 441: # documented source files. You may enter file names like "myfile.cpp" or
! 442: # directories like "/usr/src/myproject". Separate the files or directories
! 443: # with spaces.
! 444:
! 445: #INPUT = @top_srcdir@/src
! 446: INPUT = @CMAKE_CURRENT_SOURCE_DIR@
! 447:
! 448: # If the value of the INPUT tag contains directories, you can use the
! 449: # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
! 450: # and *.h) to filter out the source-files in the directories. If left
! 451: # blank the following patterns are tested:
! 452: # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
! 453: # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
! 454:
! 455: FILE_PATTERNS = *.h *.c
! 456:
! 457: # The RECURSIVE tag can be used to turn specify whether or not subdirectories
! 458: # should be searched for input files as well. Possible values are YES and NO.
! 459: # If left blank NO is used.
! 460:
! 461: RECURSIVE = YES
! 462:
! 463: # The EXCLUDE tag can be used to specify files and/or directories that should
! 464: # excluded from the INPUT source files. This way you can easily exclude a
! 465: # subdirectory from a directory tree whose root is specified with the INPUT tag.
! 466:
! 467: EXCLUDE =
! 468:
! 469: # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
! 470: # directories that are symbolic links (a Unix filesystem feature) are excluded
! 471: # from the input.
! 472:
! 473: EXCLUDE_SYMLINKS = NO
! 474:
! 475: # If the value of the INPUT tag contains directories, you can use the
! 476: # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
! 477: # certain files from those directories. Note that the wildcards are matched
! 478: # against the file with absolute path, so to exclude all test directories
! 479: # for example use the pattern */test/*
! 480:
! 481: EXCLUDE_PATTERNS =
! 482:
! 483: # The EXAMPLE_PATH tag can be used to specify one or more files or
! 484: # directories that contain example code fragments that are included (see
! 485: # the \include command).
! 486:
! 487: EXAMPLE_PATH =
! 488:
! 489: # If the value of the EXAMPLE_PATH tag contains directories, you can use the
! 490: # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
! 491: # and *.h) to filter out the source-files in the directories. If left
! 492: # blank all files are included.
! 493:
! 494: EXAMPLE_PATTERNS =
! 495:
! 496: # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
! 497: # searched for input files to be used with the \include or \dontinclude
! 498: # commands irrespective of the value of the RECURSIVE tag.
! 499: # Possible values are YES and NO. If left blank NO is used.
! 500:
! 501: EXAMPLE_RECURSIVE = NO
! 502:
! 503: # The IMAGE_PATH tag can be used to specify one or more files or
! 504: # directories that contain image that are included in the documentation (see
! 505: # the \image command).
! 506:
! 507: #IMAGE_PATH =
! 508: IMAGE_PATH = @CMAKE_CURRENT_SOURCE_DIR@
! 509:
! 510: # The INPUT_FILTER tag can be used to specify a program that doxygen should
! 511: # invoke to filter for each input file. Doxygen will invoke the filter program
! 512: # by executing (via popen()) the command <filter> <input-file>, where <filter>
! 513: # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
! 514: # input file. Doxygen will then use the output that the filter program writes
! 515: # to standard output. If FILTER_PATTERNS is specified, this tag will be
! 516: # ignored.
! 517:
! 518: INPUT_FILTER =
! 519:
! 520: # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
! 521: # basis. Doxygen will compare the file name with each pattern and apply the
! 522: # filter if there is a match. The filters are a list of the form:
! 523: # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
! 524: # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
! 525: # is applied to all files.
! 526:
! 527: FILTER_PATTERNS =
! 528:
! 529: # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
! 530: # INPUT_FILTER) will be used to filter the input files when producing source
! 531: # files to browse (i.e. when SOURCE_BROWSER is set to YES).
! 532:
! 533: FILTER_SOURCE_FILES = NO
! 534:
! 535: #---------------------------------------------------------------------------
! 536: # configuration options related to source browsing
! 537: #---------------------------------------------------------------------------
! 538:
! 539: # If the SOURCE_BROWSER tag is set to YES then a list of source files will
! 540: # be generated. Documented entities will be cross-referenced with these sources.
! 541: # Note: To get rid of all source code in the generated output, make sure also
! 542: # VERBATIM_HEADERS is set to NO.
! 543:
! 544: SOURCE_BROWSER = YES
! 545:
! 546: # Setting the INLINE_SOURCES tag to YES will include the body
! 547: # of functions and classes directly in the documentation.
! 548:
! 549: #INLINE_SOURCES = NO
! 550: INLINE_SOURCES = YES
! 551:
! 552: # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
! 553: # doxygen to hide any special comment blocks from generated source code
! 554: # fragments. Normal C and C++ comments will always remain visible.
! 555:
! 556: #STRIP_CODE_COMMENTS = YES
! 557: STRIP_CODE_COMMENTS = NO
! 558:
! 559: # If the REFERENCED_BY_RELATION tag is set to YES (the default)
! 560: # then for each documented function all documented
! 561: # functions referencing it will be listed.
! 562:
! 563: REFERENCED_BY_RELATION = YES
! 564:
! 565: # If the REFERENCES_RELATION tag is set to YES (the default)
! 566: # then for each documented function all documented entities
! 567: # called/used by that function will be listed.
! 568:
! 569: REFERENCES_RELATION = YES
! 570:
! 571: # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
! 572: # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
! 573: # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
! 574: # link to the source code. Otherwise they will link to the documentstion.
! 575:
! 576: REFERENCES_LINK_SOURCE = YES
! 577:
! 578: # If the USE_HTAGS tag is set to YES then the references to source code
! 579: # will point to the HTML generated by the htags(1) tool instead of doxygen
! 580: # built-in source browser. The htags tool is part of GNU's global source
! 581: # tagging system (see http://www.gnu.org/software/global/global.html). You
! 582: # will need version 4.8.6 or higher.
! 583:
! 584: USE_HTAGS = NO
! 585:
! 586: # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
! 587: # will generate a verbatim copy of the header file for each class for
! 588: # which an include is specified. Set to NO to disable this.
! 589:
! 590: #VERBATIM_HEADERS = NO
! 591: VERBATIM_HEADERS = YES
! 592:
! 593: #---------------------------------------------------------------------------
! 594: # configuration options related to the alphabetical class index
! 595: #---------------------------------------------------------------------------
! 596:
! 597: # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
! 598: # of all compounds will be generated. Enable this if the project
! 599: # contains a lot of classes, structs, unions or interfaces.
! 600:
! 601: ALPHABETICAL_INDEX = NO
! 602:
! 603: # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
! 604: # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
! 605: # in which this list will be split (can be a number in the range [1..20])
! 606:
! 607: COLS_IN_ALPHA_INDEX = 5
! 608:
! 609: # In case all classes in a project start with a common prefix, all
! 610: # classes will be put under the same header in the alphabetical index.
! 611: # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
! 612: # should be ignored while generating the index headers.
! 613:
! 614: IGNORE_PREFIX =
! 615:
! 616: #---------------------------------------------------------------------------
! 617: # configuration options related to the HTML output
! 618: #---------------------------------------------------------------------------
! 619:
! 620: # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
! 621: # generate HTML output.
! 622:
! 623: GENERATE_HTML = YES
! 624:
! 625: # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
! 626: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
! 627: # put in front of it. If left blank `html' will be used as the default path.
! 628:
! 629: HTML_OUTPUT = html
! 630:
! 631: # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
! 632: # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
! 633: # doxygen will generate files with .html extension.
! 634:
! 635: HTML_FILE_EXTENSION = .html
! 636:
! 637: # The HTML_HEADER tag can be used to specify a personal HTML header for
! 638: # each generated HTML page. If it is left blank doxygen will generate a
! 639: # standard header.
! 640:
! 641: HTML_HEADER =
! 642: #HTML_HEADER = @CMAKE_CURRENT_SOURCE_DIR@/build/doxygen/header.html
! 643:
! 644: # The HTML_FOOTER tag can be used to specify a personal HTML footer for
! 645: # each generated HTML page. If it is left blank doxygen will generate a
! 646: # standard footer.
! 647:
! 648: HTML_FOOTER =
! 649: #HTML_FOOTER = @CMAKE_CURRENT_SOURCE_DIR@/build/doxygen/footer.html
! 650:
! 651: # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
! 652: # style sheet that is used by each HTML page. It can be used to
! 653: # fine-tune the look of the HTML output. If the tag is left blank doxygen
! 654: # will generate a default style sheet. Note that doxygen will try to copy
! 655: # the style sheet file to the HTML output directory, so don't put your own
! 656: # stylesheet in the HTML output directory as well, or it will be erased!
! 657:
! 658: HTML_STYLESHEET =
! 659: #HTML_STYLESHEET = @CMAKE_CURRENT_SOURCE_DIR@/doxygen/customdoxygen.css
! 660:
! 661: # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
! 662: # files or namespaces will be aligned in HTML using tables. If set to
! 663: # NO a bullet list will be used.
! 664:
! 665: #HTML_ALIGN_MEMBERS = YES # Obsolete
! 666:
! 667: # If the GENERATE_HTMLHELP tag is set to YES, additional index files
! 668: # will be generated that can be used as input for tools like the
! 669: # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
! 670: # of the generated HTML documentation.
! 671:
! 672: GENERATE_HTMLHELP = YES
! 673:
! 674: # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
! 675: # be used to specify the file name of the resulting .chm file. You
! 676: # can add a path in front of the file if the result should not be
! 677: # written to the html output directory.
! 678:
! 679: CHM_FILE =
! 680:
! 681: # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
! 682: # be used to specify the location (absolute path including file name) of
! 683: # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
! 684: # the HTML help compiler on the generated index.hhp.
! 685:
! 686: HHC_LOCATION =
! 687:
! 688: # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
! 689: # controls if a separate .chi index file is generated (YES) or that
! 690: # it should be included in the master .chm file (NO).
! 691:
! 692: GENERATE_CHI = NO
! 693:
! 694: # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
! 695: # controls whether a binary table of contents is generated (YES) or a
! 696: # normal table of contents (NO) in the .chm file.
! 697:
! 698: BINARY_TOC = NO
! 699:
! 700: # The TOC_EXPAND flag can be set to YES to add extra items for group members
! 701: # to the contents of the HTML help documentation and to the tree view.
! 702:
! 703: TOC_EXPAND = NO
! 704:
! 705: # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
! 706: # top of each HTML page. The value NO (the default) enables the index and
! 707: # the value YES disables it.
! 708:
! 709: DISABLE_INDEX = NO
! 710:
! 711: # This tag can be used to set the number of enum values (range [1..20])
! 712: # that doxygen will group on one line in the generated HTML documentation.
! 713:
! 714: ENUM_VALUES_PER_LINE = 4
! 715:
! 716: # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
! 717: # generated containing a tree-like index structure (just like the one that
! 718: # is generated for HTML Help). For this to work a browser that supports
! 719: # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
! 720: # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
! 721: # probably better off using the HTML help feature.
! 722:
! 723: GENERATE_TREEVIEW = YES
! 724:
! 725: # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
! 726: # used to set the initial width (in pixels) of the frame in which the tree
! 727: # is shown.
! 728:
! 729: TREEVIEW_WIDTH = 250
! 730:
! 731: #---------------------------------------------------------------------------
! 732: # configuration options related to the LaTeX output
! 733: #---------------------------------------------------------------------------
! 734:
! 735: # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
! 736: # generate Latex output.
! 737:
! 738: GENERATE_LATEX = YES
! 739:
! 740: # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
! 741: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
! 742: # put in front of it. If left blank `latex' will be used as the default path.
! 743:
! 744: LATEX_OUTPUT = latex
! 745:
! 746: # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
! 747: # invoked. If left blank `latex' will be used as the default command name.
! 748:
! 749: LATEX_CMD_NAME = latex
! 750:
! 751: # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
! 752: # generate index for LaTeX. If left blank `makeindex' will be used as the
! 753: # default command name.
! 754:
! 755: MAKEINDEX_CMD_NAME = makeindex
! 756:
! 757: # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
! 758: # LaTeX documents. This may be useful for small projects and may help to
! 759: # save some trees in general.
! 760:
! 761: COMPACT_LATEX = NO
! 762:
! 763: # The PAPER_TYPE tag can be used to set the paper type that is used
! 764: # by the printer. Possible values are: a4, a4wide, letter, legal and
! 765: # executive. If left blank a4wide will be used.
! 766:
! 767: PAPER_TYPE = a4wide
! 768:
! 769: # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
! 770: # packages that should be included in the LaTeX output.
! 771:
! 772: EXTRA_PACKAGES =
! 773:
! 774: # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
! 775: # the generated latex document. The header should contain everything until
! 776: # the first chapter. If it is left blank doxygen will generate a
! 777: # standard header. Notice: only use this tag if you know what you are doing!
! 778:
! 779: LATEX_HEADER =
! 780:
! 781: # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
! 782: # is prepared for conversion to pdf (using ps2pdf). The pdf file will
! 783: # contain links (just like the HTML output) instead of page references
! 784: # This makes the output suitable for online browsing using a pdf viewer.
! 785:
! 786: PDF_HYPERLINKS = YES
! 787:
! 788: # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
! 789: # plain latex in the generated Makefile. Set this option to YES to get a
! 790: # higher quality PDF documentation.
! 791:
! 792: USE_PDFLATEX = YES
! 793:
! 794: # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
! 795: # command to the generated LaTeX files. This will instruct LaTeX to keep
! 796: # running if errors occur, instead of asking the user for help.
! 797: # This option is also used when generating formulas in HTML.
! 798:
! 799: LATEX_BATCHMODE = YES
! 800:
! 801: # If LATEX_HIDE_INDICES is set to YES then doxygen will not
! 802: # include the index chapters (such as File Index, Compound Index, etc.)
! 803: # in the output.
! 804:
! 805: LATEX_HIDE_INDICES = NO
! 806:
! 807: #---------------------------------------------------------------------------
! 808: # configuration options related to the RTF output
! 809: #---------------------------------------------------------------------------
! 810:
! 811: # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
! 812: # The RTF output is optimized for Word 97 and may not look very pretty with
! 813: # other RTF readers or editors.
! 814:
! 815: GENERATE_RTF = NO
! 816:
! 817: # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
! 818: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
! 819: # put in front of it. If left blank `rtf' will be used as the default path.
! 820:
! 821: RTF_OUTPUT = rtf
! 822:
! 823: # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
! 824: # RTF documents. This may be useful for small projects and may help to
! 825: # save some trees in general.
! 826:
! 827: COMPACT_RTF = NO
! 828:
! 829: # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
! 830: # will contain hyperlink fields. The RTF file will
! 831: # contain links (just like the HTML output) instead of page references.
! 832: # This makes the output suitable for online browsing using WORD or other
! 833: # programs which support those fields.
! 834: # Note: wordpad (write) and others do not support links.
! 835:
! 836: RTF_HYPERLINKS = NO
! 837:
! 838: # Load stylesheet definitions from file. Syntax is similar to doxygen's
! 839: # config file, i.e. a series of assignments. You only have to provide
! 840: # replacements, missing definitions are set to their default value.
! 841:
! 842: RTF_STYLESHEET_FILE =
! 843:
! 844: # Set optional variables used in the generation of an rtf document.
! 845: # Syntax is similar to doxygen's config file.
! 846:
! 847: RTF_EXTENSIONS_FILE =
! 848:
! 849: #---------------------------------------------------------------------------
! 850: # configuration options related to the man page output
! 851: #---------------------------------------------------------------------------
! 852:
! 853: # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
! 854: # generate man pages
! 855:
! 856: GENERATE_MAN = NO
! 857:
! 858: # The MAN_OUTPUT tag is used to specify where the man pages will be put.
! 859: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
! 860: # put in front of it. If left blank `man' will be used as the default path.
! 861:
! 862: MAN_OUTPUT = man
! 863:
! 864: # The MAN_EXTENSION tag determines the extension that is added to
! 865: # the generated man pages (default is the subroutine's section .3)
! 866:
! 867: MAN_EXTENSION = .3
! 868:
! 869: # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
! 870: # then it will generate one additional man file for each entity
! 871: # documented in the real man page(s). These additional files
! 872: # only source the real man page, but without them the man command
! 873: # would be unable to find the correct page. The default is NO.
! 874:
! 875: MAN_LINKS = NO
! 876:
! 877: #---------------------------------------------------------------------------
! 878: # configuration options related to the XML output
! 879: #---------------------------------------------------------------------------
! 880:
! 881: # If the GENERATE_XML tag is set to YES Doxygen will
! 882: # generate an XML file that captures the structure of
! 883: # the code including all documentation.
! 884:
! 885: GENERATE_XML = NO
! 886:
! 887: # The XML_OUTPUT tag is used to specify where the XML pages will be put.
! 888: # If a relative path is entered the value of OUTPUT_DIRECTORY will be
! 889: # put in front of it. If left blank `xml' will be used as the default path.
! 890:
! 891: XML_OUTPUT = xml
! 892:
! 893: # The XML_SCHEMA tag can be used to specify an XML schema,
! 894: # which can be used by a validating XML parser to check the
! 895: # syntax of the XML files.
! 896:
! 897: XML_SCHEMA =
! 898:
! 899: # The XML_DTD tag can be used to specify an XML DTD,
! 900: # which can be used by a validating XML parser to check the
! 901: # syntax of the XML files.
! 902:
! 903: XML_DTD =
! 904:
! 905: # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
! 906: # dump the program listings (including syntax highlighting
! 907: # and cross-referencing information) to the XML output. Note that
! 908: # enabling this will significantly increase the size of the XML output.
! 909:
! 910: XML_PROGRAMLISTING = YES
! 911:
! 912: #---------------------------------------------------------------------------
! 913: # configuration options for the AutoGen Definitions output
! 914: #---------------------------------------------------------------------------
! 915:
! 916: # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
! 917: # generate an AutoGen Definitions (see autogen.sf.net) file
! 918: # that captures the structure of the code including all
! 919: # documentation. Note that this feature is still experimental
! 920: # and incomplete at the moment.
! 921:
! 922: GENERATE_AUTOGEN_DEF = NO
! 923:
! 924: #---------------------------------------------------------------------------
! 925: # configuration options related to the Perl module output
! 926: #---------------------------------------------------------------------------
! 927:
! 928: # If the GENERATE_PERLMOD tag is set to YES Doxygen will
! 929: # generate a Perl module file that captures the structure of
! 930: # the code including all documentation. Note that this
! 931: # feature is still experimental and incomplete at the
! 932: # moment.
! 933:
! 934: GENERATE_PERLMOD = NO
! 935:
! 936: # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
! 937: # the necessary Makefile rules, Perl scripts and LaTeX code to be able
! 938: # to generate PDF and DVI output from the Perl module output.
! 939:
! 940: PERLMOD_LATEX = NO
! 941:
! 942: # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
! 943: # nicely formatted so it can be parsed by a human reader. This is useful
! 944: # if you want to understand what is going on. On the other hand, if this
! 945: # tag is set to NO the size of the Perl module output will be much smaller
! 946: # and Perl will parse it just the same.
! 947:
! 948: PERLMOD_PRETTY = YES
! 949:
! 950: # The names of the make variables in the generated doxyrules.make file
! 951: # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
! 952: # This is useful so different doxyrules.make files included by the same
! 953: # Makefile don't overwrite each other's variables.
! 954:
! 955: PERLMOD_MAKEVAR_PREFIX =
! 956:
! 957: #---------------------------------------------------------------------------
! 958: # Configuration options related to the preprocessor
! 959: #---------------------------------------------------------------------------
! 960:
! 961: # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
! 962: # evaluate all C-preprocessor directives found in the sources and include
! 963: # files.
! 964:
! 965: ENABLE_PREPROCESSING = YES
! 966:
! 967: # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
! 968: # names in the source code. If set to NO (the default) only conditional
! 969: # compilation will be performed. Macro expansion can be done in a controlled
! 970: # way by setting EXPAND_ONLY_PREDEF to YES.
! 971:
! 972: MACRO_EXPANSION = YES
! 973:
! 974: # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
! 975: # then the macro expansion is limited to the macros specified with the
! 976: # PREDEFINED and EXPAND_AS_DEFINED tags.
! 977:
! 978: EXPAND_ONLY_PREDEF = YES
! 979:
! 980: # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
! 981: # in the INCLUDE_PATH (see below) will be search if a #include is found.
! 982:
! 983: SEARCH_INCLUDES = YES
! 984:
! 985: # The INCLUDE_PATH tag can be used to specify one or more directories that
! 986: # contain include files that are not input files but should be processed by
! 987: # the preprocessor.
! 988:
! 989: INCLUDE_PATH =
! 990:
! 991: # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
! 992: # patterns (like *.h and *.hpp) to filter out the header-files in the
! 993: # directories. If left blank, the patterns specified with FILE_PATTERNS will
! 994: # be used.
! 995:
! 996: INCLUDE_FILE_PATTERNS =
! 997:
! 998: # The PREDEFINED tag can be used to specify one or more macro names that
! 999: # are defined before the preprocessor is started (similar to the -D option of
! 1000: # gcc). The argument of the tag is a list of macros of the form: name
! 1001: # or name=definition (no spaces). If the definition and the = are
! 1002: # omitted =1 is assumed. To prevent a macro definition from being
! 1003: # undefined via #undef or recursively expanded use the := operator
! 1004: # instead of the = operator.
! 1005:
! 1006: PREDEFINED = LZMA_API(type)=type \
! 1007: LZMA_API_IMPORT \
! 1008: LZMA_API_CALL=
! 1009:
! 1010: # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
! 1011: # this tag can be used to specify a list of macro names that should be expanded.
! 1012: # The macro definition that is found in the sources will be used.
! 1013: # Use the PREDEFINED tag if you want to use a different macro definition.
! 1014:
! 1015: EXPAND_AS_DEFINED =
! 1016:
! 1017: # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
! 1018: # doxygen's preprocessor will remove all function-like macros that are alone
! 1019: # on a line, have an all uppercase name, and do not end with a semicolon. Such
! 1020: # function macros are typically used for boiler-plate code, and will confuse
! 1021: # the parser if not removed.
! 1022:
! 1023: SKIP_FUNCTION_MACROS = YES
! 1024:
! 1025: #---------------------------------------------------------------------------
! 1026: # Configuration::additions related to external references
! 1027: #---------------------------------------------------------------------------
! 1028:
! 1029: # The TAGFILES option can be used to specify one or more tagfiles.
! 1030: # Optionally an initial location of the external documentation
! 1031: # can be added for each tagfile. The format of a tag file without
! 1032: # this location is as follows:
! 1033: # TAGFILES = file1 file2 ...
! 1034: # Adding location for the tag files is done as follows:
! 1035: # TAGFILES = file1=loc1 "file2 = loc2" ...
! 1036: # where "loc1" and "loc2" can be relative or absolute paths or
! 1037: # URLs. If a location is present for each tag, the installdox tool
! 1038: # does not have to be run to correct the links.
! 1039: # Note that each tag file must have a unique name
! 1040: # (where the name does NOT include the path)
! 1041: # If a tag file is not located in the directory in which doxygen
! 1042: # is run, you must also specify the path to the tagfile here.
! 1043:
! 1044: TAGFILES =
! 1045:
! 1046: # When a file name is specified after GENERATE_TAGFILE, doxygen will create
! 1047: # a tag file that is based on the input files it reads.
! 1048:
! 1049: GENERATE_TAGFILE =
! 1050:
! 1051: # If the ALLEXTERNALS tag is set to YES all external classes will be listed
! 1052: # in the class index. If set to NO only the inherited external classes
! 1053: # will be listed.
! 1054:
! 1055: ALLEXTERNALS = NO
! 1056:
! 1057: # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
! 1058: # in the modules index. If set to NO, only the current project's groups will
! 1059: # be listed.
! 1060:
! 1061: EXTERNAL_GROUPS = YES
! 1062:
! 1063: # The PERL_PATH should be the absolute path and name of the perl script
! 1064: # interpreter (i.e. the result of `which perl').
! 1065:
! 1066: PERL_PATH = /usr/bin/perl
! 1067:
! 1068: #---------------------------------------------------------------------------
! 1069: # Configuration options related to the dot tool
! 1070: #---------------------------------------------------------------------------
! 1071:
! 1072: # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
! 1073: # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
! 1074: # or super classes. Setting the tag to NO turns the diagrams off. Note that
! 1075: # this option is superseded by the HAVE_DOT option below. This is only a
! 1076: # fallback. It is recommended to install and use dot, since it yields more
! 1077: # powerful graphs.
! 1078:
! 1079: CLASS_DIAGRAMS = YES
! 1080:
! 1081: # If set to YES, the inheritance and collaboration graphs will hide
! 1082: # inheritance and usage relations if the target is undocumented
! 1083: # or is not a class.
! 1084:
! 1085: HIDE_UNDOC_RELATIONS = YES
! 1086:
! 1087: # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
! 1088: # available from the path. This tool is part of Graphviz, a graph visualization
! 1089: # toolkit from AT&T and Lucent Bell Labs. The other options in this section
! 1090: # have no effect if this option is set to NO (the default)
! 1091:
! 1092: HAVE_DOT = YES
! 1093:
! 1094: # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
! 1095: # will generate a graph for each documented class showing the direct and
! 1096: # indirect inheritance relations. Setting this tag to YES will force the
! 1097: # the CLASS_DIAGRAMS tag to NO.
! 1098:
! 1099: CLASS_GRAPH = YES
! 1100:
! 1101: # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
! 1102: # will generate a graph for each documented class showing the direct and
! 1103: # indirect implementation dependencies (inheritance, containment, and
! 1104: # class references variables) of the class with other documented classes.
! 1105:
! 1106: COLLABORATION_GRAPH = YES
! 1107:
! 1108: # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
! 1109: # will generate a graph for groups, showing the direct groups dependencies
! 1110:
! 1111: GROUP_GRAPHS = YES
! 1112:
! 1113: # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
! 1114: # collaboration diagrams in a style similar to the OMG's Unified Modeling
! 1115: # Language.
! 1116:
! 1117: UML_LOOK = NO
! 1118:
! 1119: # If set to YES, the inheritance and collaboration graphs will show the
! 1120: # relations between templates and their instances.
! 1121:
! 1122: TEMPLATE_RELATIONS = YES
! 1123:
! 1124: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
! 1125: # tags are set to YES then doxygen will generate a graph for each documented
! 1126: # file showing the direct and indirect include dependencies of the file with
! 1127: # other documented files.
! 1128:
! 1129: INCLUDE_GRAPH = YES
! 1130:
! 1131: # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
! 1132: # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
! 1133: # documented header file showing the documented files that directly or
! 1134: # indirectly include this file.
! 1135:
! 1136: INCLUDED_BY_GRAPH = YES
! 1137:
! 1138: # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
! 1139: # generate a call dependency graph for every global function or class method.
! 1140: # Note that enabling this option will significantly increase the time of a run.
! 1141: # So in most cases it will be better to enable call graphs for selected
! 1142: # functions only using the \callgraph command.
! 1143:
! 1144: CALL_GRAPH = YES
! 1145:
! 1146: # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
! 1147: # generate a caller dependency graph for every global function or class method.
! 1148: # Note that enabling this option will significantly increase the time of a run.
! 1149: # So in most cases it will be better to enable caller graphs for selected
! 1150: # functions only using the \callergraph command.
! 1151:
! 1152: CALLER_GRAPH = YES
! 1153:
! 1154: # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
! 1155: # will graphical hierarchy of all classes instead of a textual one.
! 1156:
! 1157: GRAPHICAL_HIERARCHY = YES
! 1158:
! 1159: # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
! 1160: # then doxygen will show the dependencies a directory has on other directories
! 1161: # in a graphical way. The dependency relations are determined by the #include
! 1162: # relations between the files in the directories.
! 1163:
! 1164: DIRECTORY_GRAPH = YES
! 1165:
! 1166: # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
! 1167: # generated by dot. Possible values are png, jpg, or gif
! 1168: # If left blank png will be used.
! 1169:
! 1170: DOT_IMAGE_FORMAT = png
! 1171:
! 1172: # The tag DOT_PATH can be used to specify the path where the dot tool can be
! 1173: # found. If left blank, it is assumed the dot tool can be found in the path.
! 1174:
! 1175: DOT_PATH =
! 1176:
! 1177: # The DOTFILE_DIRS tag can be used to specify one or more directories that
! 1178: # contain dot files that are included in the documentation (see the
! 1179: # \dotfile command).
! 1180:
! 1181: DOTFILE_DIRS =
! 1182:
! 1183: # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
! 1184: # (in pixels) of the graphs generated by dot. If a graph becomes larger than
! 1185: # this value, doxygen will try to truncate the graph, so that it fits within
! 1186: # the specified constraint. Beware that most browsers cannot cope with very
! 1187: # large images.
! 1188:
! 1189: #MAX_DOT_GRAPH_WIDTH = 1024 # Obsolete
! 1190:
! 1191: # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
! 1192: # (in pixels) of the graphs generated by dot. If a graph becomes larger than
! 1193: # this value, doxygen will try to truncate the graph, so that it fits within
! 1194: # the specified constraint. Beware that most browsers cannot cope with very
! 1195: # large images.
! 1196:
! 1197: #MAX_DOT_GRAPH_HEIGHT = 1024 # Obsolete
! 1198:
! 1199: # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
! 1200: # graphs generated by dot. A depth value of 3 means that only nodes reachable
! 1201: # from the root by following a path via at most 3 edges will be shown. Nodes
! 1202: # that lay further from the root node will be omitted. Note that setting this
! 1203: # option to 1 or 2 may greatly reduce the computation time needed for large
! 1204: # code bases. Also note that a graph may be further truncated if the graph's
! 1205: # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
! 1206: # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
! 1207: # the graph is not depth-constrained.
! 1208:
! 1209: MAX_DOT_GRAPH_DEPTH = 0
! 1210:
! 1211: # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
! 1212: # background. This is disabled by default, which results in a white background.
! 1213: # Warning: Depending on the platform used, enabling this option may lead to
! 1214: # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
! 1215: # read).
! 1216:
! 1217: DOT_TRANSPARENT = NO
! 1218:
! 1219: # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
! 1220: # files in one run (i.e. multiple -o and -T options on the command line). This
! 1221: # makes dot run faster, but since only newer versions of dot (>1.8.10)
! 1222: # support this, this feature is disabled by default.
! 1223:
! 1224: DOT_MULTI_TARGETS = YES
! 1225:
! 1226: # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
! 1227: # generate a legend page explaining the meaning of the various boxes and
! 1228: # arrows in the dot generated graphs.
! 1229:
! 1230: GENERATE_LEGEND = YES
! 1231:
! 1232: # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
! 1233: # remove the intermediate dot files that are used to generate
! 1234: # the various graphs.
! 1235:
! 1236: DOT_CLEANUP = YES
! 1237:
! 1238: #---------------------------------------------------------------------------
! 1239: # Configuration::additions related to the search engine
! 1240: #---------------------------------------------------------------------------
! 1241:
! 1242: # The SEARCHENGINE tag specifies whether or not a search engine should be
! 1243: # used. If set to NO the values of all tags below this one will be ignored.
! 1244:
! 1245: SEARCHENGINE = YES
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/icons/small/back.gif){kind=icon}
Return to Doxyfile.in.sav CVS log ![[TXT]](/icons/small/text.gif){kind=icon}
![[DIR]](/icons/small/dir.gif){kind=icon}
Up to [Local Repository] / imach / latex